templates: Make generated config consistent

config/lxc.conf.libvirt

-lxc.network.type=veth
-lxc.network.link=virbr0
-lxc.network.flags=up
+lxc.network.type = veth
+lxc.network.link = virbr0
+lxc.network.flags = up

config/lxc.conf.ubuntu

-lxc.network.type=veth
-lxc.network.link=lxcbr0
-lxc.network.flags=up
+lxc.network.type = veth
+lxc.network.link = lxcbr0
+lxc.network.flags = up

config/lxc.conf.unknown

-lxc.network.type=empty
+lxc.network.type = empty

templates/lxc-altlinux.in

@@ -244,7 +244,7 @@ copy_configuration()
 lxc.utsname = $name
 lxc.tty = 4
 lxc.pts = 1024
-lxc.mount  = $config_path/fstab
+lxc.mount = $config_path/fstab
 
 # When using LXC with apparmor, uncomment the next line to run unconfined:
 #lxc.aa_profile = unconfined
@@ -461,4 +461,4 @@ if [ ! -z $clean ]; then
     exit 0
 fi
 echo "container rootfs and config created"
-echo "container is configured for lxc.network.type=veth and lxc.network.link=virbr0 (which is default if you have libvirt runnig)"
+echo "network configured as $lxc_network_type in the $lxc_network_link"

templates/lxc-archlinux.in

@@ -220,20 +220,20 @@ function copy_configuration {
     mkdir -p "${config_path}"
     grep -q "^lxc.rootfs" "${config_path}/config" 2>/dev/null || echo "lxc.rootfs=${rootfs_path}" >> "${config_path}/config"
     cat > "${config_path}/config" << EOF
-lxc.utsname=${name}
-lxc.tty=4
-lxc.pts=1024
-lxc.mount=${config_path}/fstab
+lxc.utsname = ${name}
+lxc.tty = 4
+lxc.pts = 1024
+lxc.mount = ${config_path}/fstab
 
 # When using LXC with apparmor, uncomment the next line to run unconfined:
 #lxc.aa_profile = unconfined
 
 #networking
-lxc.network.type=${lxc_network_type}
-lxc.network.flags=up
-lxc.network.link=${lxc_network_link}
-lxc.network.name=eth0
-lxc.network.mtu=1500
+lxc.network.type = ${lxc_network_type}
+lxc.network.flags = up
+lxc.network.link = ${lxc_network_link}
+lxc.network.name = eth0
+lxc.network.mtu = 1500
 #cgroups
 lxc.cgroup.devices.deny = a
 # /dev/null and zero

templates/lxc-busybox.in

@@ -211,8 +211,8 @@ EOF
 
 if [ -d "$rootfs/lib" ]; then
 cat <<EOF >> $path/config
-lxc.mount.entry=/lib $rootfs/lib none ro,bind 0 0
-lxc.mount.entry=/usr/lib $rootfs/usr/lib none ro,bind 0 0
+lxc.mount.entry = /lib $rootfs/lib none ro,bind 0 0
+lxc.mount.entry = /usr/lib $rootfs/usr/lib none ro,bind 0 0
 EOF
 fi
 
@@ -224,7 +224,7 @@ fi
 
     for dir in $libdirs; do
         if [ -d "/$dir" ] && [ -d "$rootfs/$dir" ]; then
-            echo "lxc.mount.entry=/$dir $dir none ro,bind 0 0" >> $path/config
+            echo "lxc.mount.entry = /$dir $dir none ro,bind 0 0" >> $path/config
         fi
     done
 }

templates/lxc-debian.in

@@ -229,8 +229,8 @@ lxc.cgroup.devices.allow = c 5:2 rwm
 lxc.cgroup.devices.allow = c 254:0 rwm
 
 # mounts point
-lxc.mount.entry=proc proc proc nodev,noexec,nosuid 0 0
-lxc.mount.entry=sysfs sys sysfs defaults  0 0
+lxc.mount.entry = proc proc proc nodev,noexec,nosuid 0 0
+lxc.mount.entry = sysfs sys sysfs defaults  0 0
 EOF
 
     if [ $? -ne 0 ]; then

templates/lxc-fedora.in

@@ -248,7 +248,7 @@ copy_configuration()
 lxc.utsname = $name
 lxc.tty = 4
 lxc.pts = 1024
-lxc.mount  = $config_path/fstab
+lxc.mount = $config_path/fstab
 
 # When using LXC with apparmor, uncomment the next line to run unconfined:
 #lxc.aa_profile = unconfined

templates/lxc-lenny.in

@@ -204,8 +204,8 @@ lxc.cgroup.devices.allow = c 5:2 rwm
 lxc.cgroup.devices.allow = c 254:0 rwm
 
 # mounts point
-lxc.mount.entry=proc proc proc nodev,noexec,nosuid 0 0
-lxc.mount.entry=sysfs sys sysfs defaults  0 0
+lxc.mount.entry = proc proc proc nodev,noexec,nosuid 0 0
+lxc.mount.entry = sysfs sys sysfs defaults  0 0
 EOF
 
     if [ $? -ne 0 ]; then

templates/lxc-opensuse.in

@@ -260,7 +260,7 @@ lxc.utsname = $name
 
 lxc.tty = 4
 lxc.pts = 1024
-lxc.mount  = $path/fstab
+lxc.mount = $path/fstab
 
 # When using LXC with apparmor, uncomment the next line to run unconfined:
 #lxc.aa_profile = unconfined

templates/lxc-oracle.in

@@ -263,7 +263,7 @@ lxc.devttydir = lxc
 lxc.tty = 4
 lxc.pts = 1024
 lxc.rootfs = $container_rootfs
-lxc.mount  = $cfg_dir/fstab
+lxc.mount = $cfg_dir/fstab
 # Networking
 EOF
 

templates/lxc-sshd.in

@@ -116,14 +116,14 @@ lxc.pts = 1024
 # When using LXC with apparmor, uncomment the next line to run unconfined:
 #lxc.aa_profile = unconfined
 
-lxc.mount.entry=/dev dev none ro,bind 0 0
-lxc.mount.entry=/lib lib none ro,bind 0 0
-lxc.mount.entry=/bin bin none ro,bind 0 0
-lxc.mount.entry=/usr usr none ro,bind 0 0
-lxc.mount.entry=/sbin sbin none ro,bind 0 0
-lxc.mount.entry=tmpfs var/run/sshd tmpfs mode=0644 0 0
-lxc.mount.entry=@LXCTEMPLATEDIR@/lxc-sshd sbin/init none bind 0 0
-lxc.mount.entry=proc $rootfs/proc proc nodev,noexec,nosuid 0 0
+lxc.mount.entry = /dev dev none ro,bind 0 0
+lxc.mount.entry = /lib lib none ro,bind 0 0
+lxc.mount.entry = /bin bin none ro,bind 0 0
+lxc.mount.entry = /usr usr none ro,bind 0 0
+lxc.mount.entry = /sbin sbin none ro,bind 0 0
+lxc.mount.entry = tmpfs var/run/sshd tmpfs mode=0644 0 0
+lxc.mount.entry = @LXCTEMPLATEDIR@/lxc-sshd sbin/init none bind 0 0
+lxc.mount.entry = proc $rootfs/proc proc nodev,noexec,nosuid 0 0
 EOF
 
     # if no .ipv4 section in config, then have the container run dhcp
@@ -131,7 +131,7 @@ EOF
 
     if [ "$(uname -m)" = "x86_64" ]; then
         cat <<EOF >> $path/config
-lxc.mount.entry=/lib64 lib64 none ro,bind 0 0
+lxc.mount.entry = /lib64 lib64 none ro,bind 0 0
 EOF
     fi
 }

templates/lxc-ubuntu

@@ -331,7 +331,7 @@ lxc.utsname = $name
 lxc.devttydir =$ttydir
 lxc.tty = 4
 lxc.pts = 1024
-lxc.mount  = $path/fstab
+lxc.mount = $path/fstab
 lxc.arch = $arch
 lxc.cap.drop = sys_module mac_admin mac_override
 lxc.pivotdir = lxc_putold

templates/lxc-ubuntu-cloud.in

@@ -52,7 +52,7 @@ lxc.utsname = $name
 
 lxc.tty = 4
 lxc.pts = 1024
-lxc.mount  = $path/fstab
+lxc.mount = $path/fstab
 lxc.arch = $arch
 lxc.cap.drop = sys_module mac_admin
 lxc.pivotdir = lxc_putold