Commit f3b8088d by Dwight Engen

systemd/selinux init scripts fixups

- RHEL/OL 7 doesn't have the ifconfig command by default so have the lxc-net script check for its existence before use, and fall back to using the ip command if ifconfig is not available - When lxc-net is run from systemd on a system with selinux enabled, the mkdir -p ${varrun} will create /run/lxc as init_var_run_t which dnsmasq can't write its pid into, so we restorecon it after creation (to var_run_t) - The lxc-net systemd .service file needs an [Install] section so that "systemctl enable lxc-net" will work Signed-off-by: 's avatarDwight Engen <dwight.engen@oracle.com>
parent 7943ec56
......@@ -25,6 +25,42 @@ else
lockdir="$localstatedir"/lock
fi
_netmask2cidr ()
{
# Assumes there's no "255." after a non-255 byte in the mask
local x=${1##*255.}
set -- 0^^^128^192^224^240^248^252^254^ $(( (${#1} - ${#x})*2 )) ${x%%.*}
x=${1%%$3*}
echo $(( $2 + (${#x}/4) ))
}
ifdown() {
which ifconfig >/dev/null 2>&1
if [ $? = 0 ]; then
ifconfig $1 down
return
fi
which ip >/dev/null 2>&1
if [ $? = 0 ]; then
ip link set dev $1 down
fi
}
ifup() {
which ifconfig >/dev/null 2>&1
if [ $? = 0 ]; then
ifconfig $1 $2 netmask $3 up
return
fi
which ip >/dev/null 2>&1
if [ $? = 0 ]; then
MASK=`_netmask2cidr ${LXC_NETMASK}`
CIDR_ADDR="${LXC_ADDR}/${MASK}"
ip addr add ${CIDR_ADDR} dev $1
ip link set dev $1 up
fi
}
start() {
[ ! -f "${lockdir}"/lxc-net ] || { exit 0; }
......@@ -42,7 +78,7 @@ start() {
iptables $use_iptables_lock -D FORWARD -o ${LXC_BRIDGE} -j ACCEPT
iptables $use_iptables_lock -t nat -D POSTROUTING -s ${LXC_NETWORK} ! -d ${LXC_NETWORK} -j MASQUERADE || true
iptables $use_iptables_lock -t mangle -D POSTROUTING -o ${LXC_BRIDGE} -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
ifconfig ${LXC_BRIDGE} down || true
ifdown ${LXC_BRIDGE}
brctl delbr ${LXC_BRIDGE} || true
}
......@@ -53,8 +89,19 @@ start() {
# set up the lxc network
brctl addbr ${LXC_BRIDGE} || { echo "Missing bridge support in kernel"; stop; exit 0; }
echo 1 > /proc/sys/net/ipv4/ip_forward
mkdir -p "${varrun}"
ifconfig ${LXC_BRIDGE} ${LXC_ADDR} netmask ${LXC_NETMASK} up
# if we are run from systemd on a system with selinux enabled,
# the mkdir will create /run/lxc as init_var_run_t which dnsmasq
# can't write its pid into, so we restorecon it (to var_run_t)
if [ ! -d "${varrun}" ]; then
mkdir -p "${varrun}"
which restorecon >/dev/null 2>&1
if [ $? = 0 ]; then
restorecon "${varrun}"
fi
fi
ifup ${LXC_BRIDGE} ${LXC_ADDR} ${LXC_NETMASK}
iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
......@@ -83,7 +130,7 @@ stop() {
if [ -d /sys/class/net/${LXC_BRIDGE} ]; then
use_iptables_lock="-w"
iptables -w -L -n > /dev/null 2>&1 || use_iptables_lock=""
ifconfig ${LXC_BRIDGE} down
ifdown ${LXC_BRIDGE}
iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
......
......@@ -8,3 +8,6 @@ Type=oneshot
RemainAfterExit=yes
ExecStart=@LIBEXECDIR@/lxc/lxc-net start
ExecStop=@LIBEXECDIR@/lxc/lxc-net stop
[Install]
WantedBy=multi-user.target
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment