When using unprivileged containers, tty fails because of vhangup. Adding
--nohangup to nimgetty, it fixes the issue. This is the same problem
occurred for oracle template, commit 2e83f720

Signed-off-by: Claudio Alarcon clalarco@gmail.com

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

The netdev->priv is shared for the netdev types.  A bad config file
could mix configuration for different types, resulting in a bad
netdev->priv when starting or even destroying a container.  So sanity
check the netdev->type before setting a netdev->priv element.

This should fix https://github.com/lxc/lxc/issues/254Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Reported-by: Michael J. Evans
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Alexander Dreweke <alexander@dreweke.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

added space ">/" -> ">  /"
Signed-off-by: Alexander Dreweke <alexander@dreweke.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

This is based on the patch submitted by:
 Yuto KAWAMURA(kawamuray) <kawamuray.dadada@gmail.com>

Updated to use lxc.version rather than @LXC_VERSION@ and to apply to
both lxc-ls and lxc-device rather than just the former.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dorian Eikenberg <dorian.eikenberg@uni-duesseldorf.de>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Currently do_reboot_and_check() is decreasing timeout variable even if
it is set to -1, so running 'lxc-stop --reboot --timeout=-1 ...' will
exits immediately at end of second iteration of loop, without waiting
container reboot.
Also, there is no need to call gettimeofday if timeout is set to -1, so
these statements should be evaluated only when timeout is enabled.
Signed-off-by: Yuto KAWAMURA(kawamuray) <kawamuray.dadada@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

/etc/filesystems could be contain blank lines and comments.
Change find_fstype_cb() to ignore blank lines and comments which starts
with '#'.
Signed-off-by: Yuto KAWAMURA(kawamuray) <kawamuray.dadada@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Rodrigo Sampaio Vaz <rodrigo@heroku.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>

New kernels require that to have privilege over a file, your
userns must have the old and new groups mapped into your userns.
So if a file is owned by our uid but another groupid, then we
have to chgrp the file to our primary group before we can try
(in a new user namespace) to chgrp the file to a group id in the
namespace.

But in some cases (when cloning) the file may already be mapped
into the container.  Now we cannot chgrp the file to our own
primary group - and we don't have to.

So detect that case.  Only try to chgrp the file to our primary
group if the file is owned by our euid (i.e. not by the container)
and the owning group is not already mapped into the container by
default.

With this patch, I'm again able to both create and clone containers
with no errors again.
Reported-by: S.Çağlar Onur <caglar@10ur.org>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This updates the common config to include Serge's seccomp profile by
default for privileged containers.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Jesse Tane <jesse.tane@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

stat.st_gid is unsigned long in bionic instead of the expected gid_t, so
just cast it to gid_t.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Change idmap_add_id() to add both ID_TYPE_UID and ID_TYPE_GID entries
to an existing lxc_conf, not just an ID_TYPE_UID entry, so as to work
lxc-destroy with unprivileged containers on recent kernel.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Change chown_mapped_root() to map in both the root uid and gid, not
just the uid, so as to work lxc-start with unprivileged containers on
recent kernel.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Alexander Vladimirov <alexander.idkfa.vladimirov@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Previously this was done by strncpy, but now we just read
the len bytes - not including \0 - from a pipe, so pre-fill
@value with 0s to be safe.

This fixes the python3 api_test failure.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

This allows users to get/set cgroup settings when logged into a different
session than that from which they started the container.

There is no cgmanager command to do an _abs variant of cgmanager_get_value
and cgmanager_set_value.  So we fork off a new task, which enters the
parent cgroup of the started container, then can get/set the value from
there.  The reason not to go straight into the container's cgroup is that
if we are freezing the container, or the container is already frozen, we'll
freeze as well :)  The reason to fork off a new task is that if we are
in a cgroup which is set to remove-on-empty, we may not be able to return
to our original cgroup after making the change.

This should fix https://github.com/lxc/lxc/issues/246Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>

write_config doesn't check the value sig_name function returns,
this causes write_config to produce corrupted container config when
using non-predefined signal names.
Signed-off-by: Alexander Vladimirov <alexander.idkfa.vladimirov@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Blacklist module loading, kexec, and open_by_handle_at (the cause of the
not-docker-specific dockerinit mounts namespace escape).

This should be applied to all arches, but iiuc stgraber will be doing
some reworking of the commonizations which will simplify that, so I'm
not doing it here.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

When calling seccomp_rule_add(), you must pass the native syscall number
even if the context is a 32-bit context.  So use resolve_name rather
than resolve_name_arch.

Enhance the check of /proc/self/status for Seccomp: so that we do not
enable seccomp policies if seccomp is not built into the kernel.  This
is needed before we can enable by-default seccomp policies (which we
want to do next)

Fix wrong return value check from seccomp_arch_exist, and remove
needless abstraction in arch handling.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

seccomp_ctx is already a void*, so don't use 'scmp_filter_ctx *'

Separately track the native arch from the arch a rule is aimed at.

Clearly ignore irrelevant architectures (i.e. arm rules on x86)

Don't try to load seccomp (and don't fail) if we are already
seccomp-confined.  Otherwise nested containers fail.

Make it clear that the extra seccomp ctx is only for compat calls
on 64-bit arch.  (This will be extended to arm64 when libseccomp
supports it).  Power may will complicate this (if ever it is supported)
and require a new rethink and rewrite.

NOTE - currently when starting a 32-bit container on 64-bit host,
rules pertaining to 32-bit syscalls (as opposed to once which have
the same syscall #) appear to be ignored.  I can reproduce that without
lxc, so either there is a bug in seccomp or a fundamental
misunderstanding in how I"m merging the contexts.

Rereading the seccomp_rule_add manpage suggests that keeping the seccond
seccomp context may not be necessary, but this is not something I care
to test right now.  If it's true, then the code could be simplified, and
it may solve my concerns about power.

With this patch I'm able to start nested containers (with seccomp
policies defined) including 32-bit and 32-bit-in-64-bit.

[ this patch does not yet add the default seccomp policy ]
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Commit 0af683cf added clearing of capabilities to lxc-init, but only
after lxc_setup_fs() was done, likely so that the mounting done in
that routine wouldn't fail.

However, in my testing lxc_caps_reset() wasn't really effective
anyway since it did not clear the bounding set. Adding prctl
PR_CAPBSET_DROP in a loop from 0 to CAP_LAST_CAP would fix this, but I
don't think its necessary to forcefully clear all capabilities since
users can now specify lxc.cap.keep = none to drop all capabilities.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

If a syscall is listed which is not resolvable, continue.  This allows
us to keep a more complete list of syscalls in a global seccomp policy
without having to worry about older kernels not supporting the newer
syscalls.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Leonid Isaev <lisaev@umail.iu.edu>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

-P was only used for log setup and not when retrieving the container list.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Some error messages in lxc-test-apparmor didn't end with a newline,
leading to slightly difficult to read output.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>