Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

We didn't do it before, and it makes testcases fail.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

lxc-usernsexec was using fd 0 and reopening it as 0,1,2 for
the new task.  If doing "lxc-usernsexec .. < script" this
will corrupt the file 'script'.
Reported-by: Fiedler Roman <Roman.Fiedler@ait.ac.at>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

It's often been reported that the behavior of lxc-create without -t is a
bit confusing. This change makes lxc-create require the --template
option and introduces a new "none" special value which when set will
fallback to the old template-less behavior.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This makes stable-1.0, stable-1.1 and master all be in sync with regard
to apparmor. This has the nice added benefit of fixing an apparmor
regression with /dev/pts handling in some older kernels.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

When users wanted to mount overlay directories with lxc.mount.entry they had to
create upperdirs and workdirs beforehand in order to mount them. To create it
for them we add the functions mount_entry_create_overlay_dirs() and
mount_entry_create_aufs_dirs() which do this for them. User can now simply
specify e.g.:

        lxc.mount.entry = /lower merged overlay lowerdir=/lower,upper=/upper,workdir=/workdir,create=dir

and /upper and /workdir will be created for them. /upper and /workdir need to
be absolute paths to directories which are created under the containerdir (e.g.
under $lxcpath/CONTAINERNAME/). Relative mountpoints, mountpoints outside the
containerdir, and mountpoints within the container's rootfs are ignored. (The
latter *might* change in the future should it be considered safe/useful.)

Specifying

        lxc.mount.entry = /lower merged overlay lowerdir=/lower:/lower2,create=dir

will lead to a read-only overlay mount in accordance with the
kernel-documentation.

Specifying

        lxc.mount.entry = /lower merged overlay lowerdir=/lower,create=dir

will fail when no upperdir and workdir options are given.
Signed-off-by: Christian Brauner <christianvanbrauner@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

The default_mounts[i].destination is never NULL except in the last
'stop here' entry.  Coverity doesn't know about that and so is spewing
a warning.  In any case, let's add a more stringent check in case someone
accidentally adds a NULL there later.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 592fd47aSigned-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This would have caught the regression last night.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Enable aarch64 seccomp support for LXC containers running on ARM64
architectures. Tested with libseccomp 2.2.0 and the default seccomp
policy example files delivered with the LXC package.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

On Ubuntu 15.04, lxc-start-ephemeral's call to pwd.getpwnam always
fails.  While I haven't been able to prove it or track down an exact
cause, I strongly suspect that glibc does not guarantee that you can
call NSS functions after a context switch without re-execing.  (Running
"id root" in a subprocess from the same point works fine.)

It's safer to use getent to extract the relevant line from the passwd
file and parse it directly.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Christian Brauner <christianvanbrauner@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

CAP_BLOCK_SUSPEND (since Linux 3.5)
    Employ features that can block system suspend (epoll(7) EPOLLWAKEUP, /proc/sys/wake_lock).
Signed-off-by: Christian Brauner <christianvanbrauner@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

CAP_AUDIT_READ (since Linux 3.16)
    Allow reading the audit log via a multicast netlink socket.
Signed-off-by: Christian Brauner <christianvanbrauner@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

The dpkg architecture isn't relevant to LXC, only the kernel arch is.
Signed-off-by: Gergely Szasz <szaszg@hu.inter.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Don't proceed to try the mount if we failed to create the
target if it didn't exist.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

When a container starts up, lxc sets up the container's inital fstree
by doing a bunch of mounting, guided by the container configuration
file.  The container config is owned by the admin or user on the host,
so we do not try to guard against bad entries.  However, since the
mount target is in the container, it's possible that the container admin
could divert the mount with symbolic links.  This could bypass proper
container startup (i.e. confinement of a root-owned container by the
restrictive apparmor policy, by diverting the required write to
/proc/self/attr/current), or bypass the (path-based) apparmor policy
by diverting, say, /proc to /mnt in the container.

To prevent this,

1. do not allow mounts to paths containing symbolic links

2. do not allow bind mounts from relative paths containing symbolic
links.

Details:

Define safe_mount which ensures that the container has not inserted any
symbolic links into any mount targets for mounts to be done during
container setup.

The host's mount path may contain symbolic links.  As it is under the
control of the administrator, that's ok.  So safe_mount begins the check
for symbolic links after the rootfs->mount, by opening that directory.

It opens each directory along the path using openat() relative to the
parent directory using O_NOFOLLOW.  When the target is reached, it
mounts onto /proc/self/fd/<targetfd>.

Use safe_mount() in mount_entry(), when mounting container proc,
and when needed.  In particular, safe_mount() need not be used in
any case where:

1. the mount is done in the container's namespace
2. the mount is for the container's rootfs
3. the mount is relative to a tmpfs or proc/sysfs which we have
   just safe_mount()ed ourselves

Since we were using proc/net as a temporary placeholder for /proc/sys/net
during container startup, and proc/net is a symbolic link, use proc/tty
instead.

Update the lxc.container.conf manpage with details about the new
restrictions.

Finally, add a testcase to test some symbolic link possibilities.

Reported-by: Roman Fiedler
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
ACked-by: Stéphane Graber <stgraber@ubuntu.com>

Since we want to use null-terminated abstract sockets, let's compute the length
of them correctly.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

* Remove '-P' option, and common options (including '-P' option)
* Add long option for '-f'
* Improve Japanese translation
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

I've noticed that a bunch of the code we've included over the past few
weeks has been using 8-spaces rather than tabs, making it all very hard
to read depending on your tabstop setting.

This commit attempts to revert all of that back to proper tabs and fix a
few more cases I've noticed here and there.

No functional changes are included in this commit.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Otherwise the kernel will umount when it gets around to it, but
that on lxc_destroy we may race with it and fail the rmdir of
the overmounted (BUSY) rootfs.

This makes lxc-test-snapshot pass for me again.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

(This *should* fix the lxc-test-snapshot testcase, but doesn't seem
to by itself.)

If it doesn't exist, we may as well start with an empty one.  This
is needed when creating an overlayfs snapshot.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

We're asked to delete it, don't fail if it doesn't exist.

This stops lxc-destroy from failing when the container isn't fully
built.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Here's some more config options that we do actually require to be able to
boot containers.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Closes #655

We can't rsync the delta as unpriv user because we can't create
the chardevs representing a whiteout.  We can however rsync the
rootfs and have the kernel create the whiteouts for us.

do_rsync: pass --delete
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Christian Brauner <christianvanbrauner@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Newer kernels have added a new restriction:  if /proc or /sys on the
host has files or non-empty directories which are over-mounted, and
there is no /proc which fully visible, then it assumes there is a
"security" reason for this.  It prevents anyone in a non-initial user
namespace from creating a new proc or sysfs mount.

To work around this, this patch adds a new 'nesting.conf' which can be
lxc.include'd from a container configuration file.  It adds a
non-overmounted mount of /proc and /sys under /dev/.lxc, so that the
kernel can see that we're not trying to *hide* things like /proc/uptime.
and /sys/devices/virtual/net.  If the host adds this to the config file
for container w1, then container w1 will support unprivileged child
containers.

The nesting.conf file also sets the apparmor profile to the with-nesting
variant, since that is required anyway.  This actually means that
supporting nesting isn't really more work than it used to be, just
different.  Instead of adding

lxc.aa_profile = lxc-container-default-with-nesting

you now just need to

lxc.include = /usr/share/lxc/config/nesting.conf

(Look, fewer characters :)

Finally, in order to maintain the current apparmor protections on
proc and sys, we make /dev/.lxc/{proc,sys} non-read/writeable.
We don't need to be able to use them, we're just showing the
kernel what's what.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Add the description of optional, create=file/dir for lxc.mount.entry.
This is update for commit f5b67b36.
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

First, fix use of uninitialized variable 'ret'.  Then, actually use
the value it returned in its caller.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

On very busy systems, some virtual network devices won't be destroyed after a
container halts.  This patch uses the lxc_delete_network() method to ensure
that network devices attached to the container are destroyed when the
container halts.

Without the patch, some virtual network devices are left over on the system
and must be removed with `ip link del <device>`.  This caused containers
with lxc.network.veth.pair to not be able to start.  For containers using
randomly generated virtual network device names, the old devices will hang
around on the bridge with their original MAC address.
Signed-off-by: Major Hayden <major@mhtx.net>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

"NAME for name of the container" becomes "NAME of the container"
Signed-off-by: Christian Brauner <christianvanbrauner@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>