Signed-off-by: Johannes Kastl <git@ojkastl.de>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Cameron Norman <camerontnorman@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Do as much as possible to allow containers switching from non-systemd to
systemd to work as intended (but nothing that will cause side effects).
Use update-rc.d disable instead of remove so the init scripts are not
re-enabled when the package is updated
Signed-off-by: Cameron Norman <camerontnorman@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Containers with systemd need a somewhat special setup, which I borrowed
and adapted from lxc-fedora. These changes are required so that Debian 8
(jessie) containers work properly, and are a no-op for previous Debian
versions.
Signed-off-by: Antonio Terceiro <terceiro@debian.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Fix a typo in the lines inserted in the default sources.list.
Change the default mirror to http.debian.net which is (supposedly) more
accurate and better than cdn.debian.net for a generic configuration.
Use security.debian.org directly for the {release}/updates repository.
Signed-off-by: Gu1 <gu1@aeroxteam.fr>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

- added --mirror, --security-mirror and --package parameters
- generate source.list
- install packages into final lxc instance

Update by Stéphane Graber for stable-1.0:
 - Drop the addition of --packages (new feature)
Signed-off-by: Alexander Dreweke <alexander@dreweke.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Bind mounts do not honor filesystem mount options. This change will
remount filesystems that are bind mounted if there are changes to
filesystem mount options, specifically if the mount is readonly.
Signed-off-by: Abin Shahab <ashahab@altiscale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Create a tty so we get login prompt on console by default
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

nlmsg_len is the length of message including header.
Signed-off-by: Shuai Zhang <zs.broccoli@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Disabled building openSUSE containers on openSUSE 13.2 and openSUSE
Tumbleweed due to faulty behaviour with newer versions of
init_buildsystem.
Signed-off-by: Johannes Kastl <git@ojkastl.de>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 0dcbd624Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Closes: #355
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: 謝致邦 <Yeking@Red54.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: 謝致邦 <Yeking@Red54.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Support creation and use of lxc-cirros by unprivileged users.

If we detect we are an unprivileged user, then insist that we
be in a userns with a id mapping.

If we are in a userns, then don't extract /dev when extracting
the rootfs.

If we are not root, then save the tarball to ~/.cache/lxc/cirros
instead of /var/cache/lxc/cirros.

If we are not roo, then include entries to auto-mount proc and sys,
as well as bind-mount devices.

Cc: Scott Moser <smoser@ubuntu.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This is a multipart message in MIME format.

Fixes a small (but consistent) spelling mistake in conf.c
Signed-off-by: Joel Nider <joeln@il.ibm.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Otherwise both resulting takss will print what they had flushed when they
exit.

This fixes https://bugs.launchpad.net/bugs/1389244Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Tycho Andersen <tycho.andersen@canonical.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Do mkdir $rootfs/dev/shm and then mount tmpfs on /dev/shm.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

We allocate a pointer and save this address in a static variable. After
this we freed this pointer and return.

Here a cuttout of a valgrind report:

	[...]
	==11568== Invalid read of size 1
	==11568==    at 0x4C2D524: strlen (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
	==11568==    by 0x5961C9B: puts (in /usr/lib/libc-2.20.so)
	==11568==    by 0x400890: main (lxc_config.c:73)
	==11568==  Address 0x6933e21 is 1 bytes inside a block of size 32 free'd
	==11568==    at 0x4C2B200: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
	==11568==    by 0x4E654F2: lxc_global_config_value (utils.c:415)
	==11568==    by 0x4E92177: lxc_get_global_config_item (lxccontainer.c:2287)
	==11568==    by 0x400883: main (lxc_config.c:71)
	[...]
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>

"all" is not a supported keyword for cgmanager's get_pid_cgroup.
Pass the first mounted cgroup subsystem instead of passing "all" when
getting the container's cgorup to attach to.

Also, make sure that the target cgroup is in fact in all identical
cgroups before attaching with 'all".  If not, then we must attach to
each cgroup separately, or else we will not be in all the same cgroups
as the target container.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

If attach is being done over passed-in fds, then we shouldn't
mess with the caller's signal table to ignore ctrl-c over the
fd.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Sergio Jimenez <tripledes@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This addresses https://github.com/lxc/lxc/issues/280.
Signed-off-by: Simon Deziel <simon@sdeziel.info>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

It is not system-definable, rather glibc sets that to bin:/usr/bin, which is
simply too restrictive.  So just always set our preferred path.

This was reported at:
https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1384327Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Rather than try to free all the not-being-returned items at
each if clause where we assign one to return value, just NULL
the one we are returning so we can safely free all the
values.  This should fix the newly reported coverity memory
leak
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

If we are root using a user namespace and are mounting a blockdev as rootfs,
then we do this before unsharing the userns, because we are not allowed to
do it in a userns.  But after unsharing the userns, we unconditionally
retried mounting the rootfs, resulting in failure.  stop that.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Behave well when /etc/lxc/${name} is a symlink to directory
Signed-off-by: Dark Templar <dark_templar@hotbox.ru>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Fix return value on bind mount failure.

If we've already mounted the rootfs, exit after the bind mount
rather than re-trying the rootfs mount.  The only case where
this happens is when root is starting a container in a user
namespace and with a block device backing store.

In that case, pre-mount hooks will be executed in the initial
user namespace.  That may be worth fixing.  Or it may be what
we want.  We should think about it and fix it.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

I've found one more typo in the gentoo template, configuration in the
generated file /etc/conf.d/hostname was not valid, but it didn't impact
me due to "lxc.utsname" being set in the configuration file of container
and hostname service being not used. Anyway, I've made a patch and
sending it with this mail.
Signed-off-by: Dark Templar <dark_templar@hotbox.ru>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

When running unprivileged, lxc-create will touch a fstab file, with bind-mounts
for the ttys and other devices. Add this entry in the container config.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Apply the changes found in templates/lxc-download to the busybox template as
well. Change ownership of the config and fstab files to the unprivileged user,
and the ownership of the rootfs to root in the new user namespace.

Eliminate the "unsupported for userns" flag.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

>>> On Tue, 30 Sep 2014 19:48:09 +0000
    in message   "Re: [lxc-devel] [PATCH] lxc-config can show lxc.cgroup.(use|pattern)"
                  Serge Hallyn-san wrote:

> I think it would be worth also augmenting
> lxc_global_config_value() to return a default lxc.cgroup.use
> for 'all', and a default lxc.cgroup.pattern ("/lxc/%n" for root
> or "%n" for non-root).

lxc.cgroup.pattern is like this? (^_^;)
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Dark Templar <dark_templar@hotbox.ru>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

because that's what it does
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

When we need to know some info about a netdev, such as is_up or not,
we need to read the flag for the netdev.

This patch introduce a interface function named lxc_netdev_isup()
to check is a netdev up or down.

And introduce a network private function named netdev_get_flag()
to get flag for netdev by netlink.

Changelog: 10/15/2015: Return failure if name==NULL to avoid later strlen fun
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

In netlink, we can set the dest_name of netdev when move netdev
between namespaces in one netlink request. And moving a netdev of
a src_name to a netdev with a dest_name is a common usecase.

So this patch add a parametaer to lxc_network_move_by_index() to
indicate the dest_name for the movement. NULL means same with
the src_name.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>