Always add the user to the 'sudo' group as it's been around
since at least Ubuntu 10.04. In addition make the user part
of the admin group until 12.04 where it's been removed.
Also fix a minor layout issue with devttydir.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

If a host user is bound into the container (-b), make sure that his
shell is installed in the container.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Since we are creating a new container it should not share a macaddr with
the original container.

Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/934256Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

It's possible for only one of /lib64 and /usr/lib64 to exist, so
adding both fstab entries can cause the busybox container to fail
to start.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Otherwise callers can get bad containers without knowing it.

Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/922645Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

In general, lxc-create should not mess with this and leave it entirely
up to the templates to create it.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

 (Closes: #659011).
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Fix signal names in lxc-clone trap.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Fix correct signal names in lxc-create trap (Closes: #655173).
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Allow to use -- as seperator in lxc-netstat, otherwise -n from lxc-netstat
collides with netstats -n option (Closes: #641251). 
[Serge Hallyn] update patch to (1) not demand argument for
 exec (breaks) and  (2) set $name not $lxc_name.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Use non-routed, private IPv4 address in documentation examples
(Closes: #571525).
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Keeping creation of new containers without previously existing configuration
non-interactive and trimm the warning message.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Support new default location for LXCINITDIR.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Display help information in a consistent format.

Print error messages and help information to stderr. Prefix error
messages with the name of the script (for easier debugging as part
of larger scripts).

Allow help information to be printed as a non-root user.

Fix file mode for lxc-checkconfig.in.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Use bash instead of perl; eliminates final lxc dependency on perl
(beneficial for minimal operating system environments).

Modify the cgroup search to only use hierarchies that contain one
or more subsystems. When searching, if a hierarchy contains the
'ns' subsystem, do not append '/lxc' to the parent cgroup.

Maintain column spacing. Expand container name column as necessary.
Properly handle spaces in 'ps' output that are not field separators
(for example, try 'lxc-ps -o pid,args').

Fix file mode in repository.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Modify the cgroup search to only use hierarchies that contain one
or more subsystems. When searching, if a hierarchy contains the
'ns' subsystem, do not append '/lxc' to the parent cgroup.

Change method of bind mounting /proc/<pid>/net onto /proc/net, to
avoid error "cannot mount block device /proc/<pid>/net read-only".

Check that user is root. Check that container name is specified
before calling 'exec'.

Update the help information.

Print error messages and help information to stderr.

Make indentation consistent.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Add an '--active' option that lists active containers by searching
cgroups. (Otherwise, the directories in /var/lib/lxc are listed.)
Modify the cgroup search to only use hierarchies that contain one
or more subsystems. When searching, if a hierarchy contains the
'ns' subsystem, do not append '/lxc' to the parent cgroup.

Add a '--help' option that prints the command syntax.

Print error messages and help information to stderr.

Update the documentation.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Obtain a list of subsystems from /proc/cgroups, and ignore hierarchies
that are not bound to any of them (especially the 'systemd' hierarchy:
http://www.freedesktop.org/wiki/Software/systemd/PaxControlGroups ).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

To attach a new pid to the cgroups for an existing container, we can use
the same method that we did when we started the container: iterate over
all the mounted cgroup hierarchies; find the cgroup that pid 1 is in for
each hierarchy; add 'lxc/<name>' to the end of it; then write the pid to
the 'tasks' file in that cgroup. (The only difference is that we do not
create the cgroup again.) Note that we follow exactly the same iteration
pattern to delete our cgroups when a container is shutdown.

There may be situations where additional cgroups hierarchies are mounted
after the container is started, or the cgroup for pid 1 gets reassigned.
But we currently don't handle any of these cases in the shutdown code or
anywhere else, so it doesn't make sense to try to handle these cases for
lxc-attach by itself. Aside from simplifying the code, this change makes
it easier to solve a different problem: ignoring hierarchies that are
not bound to any subsystems (like 'systemd').
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Avoid nesting and improve readability.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

lxc-cgroup gets or sets the value of a state object (such as
'cpuset.cpus'), not the value of a subsystem (which would be
just 'cpuset').
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

When a hierarchy contains the 'ns' subsystem, do not append '/lxc'
to the parent cgroup. Update surrounding comments for consistency.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Having a rootfs is not a necessary condition for monitoring utmp, since
/var or /var/run can just be remounted inside the container instead. We
should rely on the other two conditions already in place to decide
whether to monitor the utmp file:

 - the container was started with 'lxc-start', which indicates that it
   has a real init process and is expected to write to a utmp file

 - support for CAP_SYS_BOOT was not found in the kernel, which would
   otherwise supersede utmp monitoring
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

If CAP_SYS_BOOT is not found in the kernel, the existing value for
conf->need_utmp_watch should be left intact (which will be '1' for
containers started with 'lxc-start', or '0' for containers started
with 'lxc-execute').
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

execvp does not require specifying the full path to the executable
(e.g., "ls" instead of "/bin/ls"), making the operation of 'lxc-attach'
consistent with 'lxc-start' and 'lxc-execute'.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

__NR_setns is defined in the Linux kernel headers in linux/unistd.h.
The full Linux kernel sources are not necessary for compilation.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

(which reminds me a lxc-clone manpage still needs to be written)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

1. fix inconsistent use of '--auth-key' (not --auth_key) which broke their
   usage
2. add --debug option to lxc-ubuntu (which does set -x to show what broke)
   (idea from Idea from lifeless and benji)
3. fix incorrect assumption about group with -b option.  User's default group
   may not be the same as username.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

We were doing the check for whether we need to watch utmp from a
thread cloned from that which will actually do the utmp watching.
As a result, the utmp file was always being watched, even if it
didn't need to be.

Move the check to the parent thread.

Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/948623Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: InformatiQ <rhanna@informatiq.org>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

when using ns cgroup, use /cgroup/<init-cgroup> rather than
/cgroup/<init-cgroup>/lxc

At least lxc-start, lxc-stop, lxc-cgroup, lxc-console and lxc-ls work
with this patch.  I've tested this in a 2.6.35 kernel with ns cgroup,
and in a 3.2 kernel without ns cgroup.

Note also that because of the check for container reboot support,
if we're using the ns cgroup we now end up with a /cgroup/<container>/2
cgroup created, empty, by the clone(CLONE_NEWPID).  I'm really not
sure how much time we want to spend cleaning such things up since
ns cgroup is deprecated in kernel.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>

Reported-by : Denny Schierz <linuxmail@4lin.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>

Otherwise there is no clear indication to the user why the container
startup failed.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Add a macaddr if precisely one veth is specified but no hwaddr.  Allow
specifying ssh authkeys.  In cloud template, copy locales by default and allow
a tarball to be specified.
Signed-off-by: Ben Howard <ben.howard@canonical.com>
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

 1. --path is meant to be passed by lxc-create, but should not be passed
 in by users.  Don't advertise it in --help.
 2. --clean syntax ends up not making much sense.  Get rid of it, and
 add '--flush-cache' option instead.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>