New kernels require that to have privilege over a file, your
userns must have the old and new groups mapped into your userns.
So if a file is owned by our uid but another groupid, then we
have to chgrp the file to our primary group before we can try
(in a new user namespace) to chgrp the file to a group id in the
namespace.

But in some cases (when cloning) the file may already be mapped
into the container.  Now we cannot chgrp the file to our own
primary group - and we don't have to.

So detect that case.  Only try to chgrp the file to our primary
group if the file is owned by our euid (i.e. not by the container)
and the owning group is not already mapped into the container by
default.

With this patch, I'm again able to both create and clone containers
with no errors again.
Reported-by: S.Çağlar Onur <caglar@10ur.org>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This updates the common config to include Serge's seccomp profile by
default for privileged containers.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Jesse Tane <jesse.tane@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

stat.st_gid is unsigned long in bionic instead of the expected gid_t, so
just cast it to gid_t.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Change idmap_add_id() to add both ID_TYPE_UID and ID_TYPE_GID entries
to an existing lxc_conf, not just an ID_TYPE_UID entry, so as to work
lxc-destroy with unprivileged containers on recent kernel.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Change chown_mapped_root() to map in both the root uid and gid, not
just the uid, so as to work lxc-start with unprivileged containers on
recent kernel.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Alexander Vladimirov <alexander.idkfa.vladimirov@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Previously this was done by strncpy, but now we just read
the len bytes - not including \0 - from a pipe, so pre-fill
@value with 0s to be safe.

This fixes the python3 api_test failure.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

This allows users to get/set cgroup settings when logged into a different
session than that from which they started the container.

There is no cgmanager command to do an _abs variant of cgmanager_get_value
and cgmanager_set_value.  So we fork off a new task, which enters the
parent cgroup of the started container, then can get/set the value from
there.  The reason not to go straight into the container's cgroup is that
if we are freezing the container, or the container is already frozen, we'll
freeze as well :)  The reason to fork off a new task is that if we are
in a cgroup which is set to remove-on-empty, we may not be able to return
to our original cgroup after making the change.

This should fix https://github.com/lxc/lxc/issues/246Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>

write_config doesn't check the value sig_name function returns,
this causes write_config to produce corrupted container config when
using non-predefined signal names.
Signed-off-by: Alexander Vladimirov <alexander.idkfa.vladimirov@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Blacklist module loading, kexec, and open_by_handle_at (the cause of the
not-docker-specific dockerinit mounts namespace escape).

This should be applied to all arches, but iiuc stgraber will be doing
some reworking of the commonizations which will simplify that, so I'm
not doing it here.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

When calling seccomp_rule_add(), you must pass the native syscall number
even if the context is a 32-bit context.  So use resolve_name rather
than resolve_name_arch.

Enhance the check of /proc/self/status for Seccomp: so that we do not
enable seccomp policies if seccomp is not built into the kernel.  This
is needed before we can enable by-default seccomp policies (which we
want to do next)

Fix wrong return value check from seccomp_arch_exist, and remove
needless abstraction in arch handling.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

seccomp_ctx is already a void*, so don't use 'scmp_filter_ctx *'

Separately track the native arch from the arch a rule is aimed at.

Clearly ignore irrelevant architectures (i.e. arm rules on x86)

Don't try to load seccomp (and don't fail) if we are already
seccomp-confined.  Otherwise nested containers fail.

Make it clear that the extra seccomp ctx is only for compat calls
on 64-bit arch.  (This will be extended to arm64 when libseccomp
supports it).  Power may will complicate this (if ever it is supported)
and require a new rethink and rewrite.

NOTE - currently when starting a 32-bit container on 64-bit host,
rules pertaining to 32-bit syscalls (as opposed to once which have
the same syscall #) appear to be ignored.  I can reproduce that without
lxc, so either there is a bug in seccomp or a fundamental
misunderstanding in how I"m merging the contexts.

Rereading the seccomp_rule_add manpage suggests that keeping the seccond
seccomp context may not be necessary, but this is not something I care
to test right now.  If it's true, then the code could be simplified, and
it may solve my concerns about power.

With this patch I'm able to start nested containers (with seccomp
policies defined) including 32-bit and 32-bit-in-64-bit.

[ this patch does not yet add the default seccomp policy ]
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Commit 0af683cf added clearing of capabilities to lxc-init, but only
after lxc_setup_fs() was done, likely so that the mounting done in
that routine wouldn't fail.

However, in my testing lxc_caps_reset() wasn't really effective
anyway since it did not clear the bounding set. Adding prctl
PR_CAPBSET_DROP in a loop from 0 to CAP_LAST_CAP would fix this, but I
don't think its necessary to forcefully clear all capabilities since
users can now specify lxc.cap.keep = none to drop all capabilities.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

If a syscall is listed which is not resolvable, continue.  This allows
us to keep a more complete list of syscalls in a global seccomp policy
without having to worry about older kernels not supporting the newer
syscalls.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Leonid Isaev <lisaev@umail.iu.edu>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

-P was only used for log setup and not when retrieving the container list.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Some error messages in lxc-test-apparmor didn't end with a newline,
leading to slightly difficult to read output.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

The use of the download template with an hardcoded --arch=amd64 in aa.c
was causing test failures on any platform incapable of running amd64
binaries.

This wasn't noticed in the CI environment as we run the tests within
containers on an amd64 kernel but this caused failures on the Ubuntu CI
environment.

Instead, let's use the busybox template, tweaking the configuration when
needed to match the needs of the testcase.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

lxc-test-autostart occasionaly fails at the restart test in the CI
environment. Looking at the current test case, the most obvious race
there is if lxc-wait exists succesfuly immediately after LXC marked the
container RUNNING (init spawned) but before init had a chance to setup
the signal handlers.

To avoid this potential race period, let's add a 5s delay between the
tests to give a chance for init to finish starting up.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Do so early enough that we can report a meaningful failure.

(This should fix https://github.com/lxc/lxc/issues/225)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This makes sure all PyObject structs are always initialized to NULL,
this will fix issues such as (issue #239).

Also add a snapshot/list/restore testcase to the python3 api test code.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Update lxc-autostart(1) and lxc.container.conf(5) for commit 015f0dd7.
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Full backport of the autostart / autoboot rollup patch from
master to stable-1.0.

lxc-autostart: rework boot and group handling

This adds new functionality to lxc-autostart.

*) The -g / --groups option is multiple cummulative entry.
    This may be mixed freely with the previous comma separated
    group list convention.  Groups are processed in the
    order they first appear in the aggregated group list.

*) The NULL group may be specified in the group list using either a
    leading comma, a trailing comma, or an embedded comma.

*) Booting proceeds in order of the groups specified on the command line
    then ordered by lxc.start.order and name collalating sequence.

*) Default host bootup is now specified as "-g onboot," meaning that first
    the "onboot" group is booted and then any remaining enabled
    containers in the NULL group are booted.

*) Adds documentation to lxc-autostart for -g processing order and
    combinations.

*) Parameterizes bootgroups, options, and shutdown delay in init scripts
    and services.

*) Update the various init scripts to use lxc-autostart in a similar way.
Reported-by: CDR <venefax@gmail.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Michael H. Warfield <mhw@WittsEnd.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This hides some of the confusing "command X failed to receive response"
why are usually caused by another more understandable error.

On failure to start() from lxc-start, a new error message is displayed,
suggesting the user sets logfile and loglevel and if using -d, restarts
the container in the foreground instead.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

It is not possible to mount a block device from a non-init user namespace.
Therefore if root on the host is starting a container with a uid
mapping, and the rootfs is a block device, then mount the rootfs before
we spawn the container init task.

This addresses https://github.com/lxc/lxc/issues/221Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This is to deal with the GPG pool occasionaly yielding broken servers.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Set the halt.target action to be sigpwr.target.  This allows
SIGPWR to properly shut the container down from lxc-stop.

Renable the systemd-journald.service.
Signed-off-by: Michael H. Warfield <mhw@WittsEnd.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

before using it, like the other snapshot api methods do.

This will need to go into stable-1.0 as well.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

The template name isn't required, if it's not passed, then create will
simply be asked to create a container without a rootfs.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Bartosz Tomczyk <bartekplus@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>