Introduced in commit df2d4205.
Reported-by: S.Çağlar Onur <caglar@10ur.org>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

By setting lxc.network.hwaddr to something like fe:xx:xx:xx:xx:xx each
"x" will be replaced by a random value.  If less significant bit of
first byte is "templated", it will be set to 0.

This change introduce also a common randinit() function that could be
used to initialize random generator.
Signed-off-by: gza <lxc@zitta.fr>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

It simply creates a test user and tries to create and start
a container as that user.  Tries to lxc-attach to that
container to test network connectivity.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

It's nice if we can do it, but not required.  Exiting on this
failure causes lxc-create started by root as a less-privileged
userid to fail.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Since previously I had found a config item that wasn't being propagated
by lxc-clone, I went through all the config items and made sure that:
 a) Each item is documented in lxc.conf
 b) Each item is written out by write_config

The only one that isn't is lxc.include, which by its nature only pulls
in other config item types.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Currently when a container is shut down, lxc walks the set of all
cgroup paths it created, in reverse order, and tries to remove them.
This doesn't suffice if the container has also created new cgroups.

It'd be impolite to recursively remove all the cgroup paths we created,
since this can include '/lxc' and thereunder all other containers
started since.

This patch changes container shutdown to only delete the container's own
path, but do so recursively.  Note that if we fail during startup,
the container won't have created any cgroup paths so it the old
way works fine.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This adds a new template called "download". It's a fairly simple
template with a minimal set of dependency which will grab any pre-built
image available on https://images.linuxcontainers.org
Note that the serverside is still work in progress (missing SSL support).

Access is done over https by default with a warning being emitted if
fallback to http was required (may be needed for testing, when behind
proxy and with private servers). All index files and tarballs are
gpg-signed with the default pubkeyid contained in the template itself.

The main benefit of this template is to be entirely
distribution-agnostic, any template that can be integrated with the
server build infrastructure will then work on any LXC machine when using
the download template. This template is also compatible with user
namespaces and will hopefully help widden the number of distros that may
work in unprivileged LXC.

This commit also bundles a small change to the template configs to have
the ubuntu template (used by the download template) to work with
unprivileged LXC.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

This should be the last change of name for those options. This change
basically move them all to lxc.bdev.<backend>.<option>.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>

If /proc/self/ns does not exist, then preserve_ns was failing to
initialize the saved_ns[i] to -1.  This caused attach_ns() to try
and attach, and of course fail.

Initialize the saved ns values before returning an error.

The return values of preserve_ns and attach_ns were also being
ignored.  Honor them.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Instead of having one function for each possible key in lxc.conf which
doesn't really scale and requires an API update for every new key,
switch to a generic lxc_get_global_config_item() function which takes a
key name as argument.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This is a first step in bringing the lxc.conf configfile in line with
the container's format.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

The old version of lxc-ls is the wrapper of ls(1). But now it is
python script, so "see also ls(1)" is not needed.
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Change all instances of "unsigned long" where referring to a bdev size
to uint64_t; this fixes some overflows on 32-bit machines, where
"unsigned long" is uint32_t. Support all unit-sizes supported by LVM
except 's' and 'e' [bkmgt]. Print a warning and use default bdev-size if
invalid unit-size specified.
Signed-off-by: Stephen Ayotte <stephen.ayotte@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

It is needed by insserv-compat.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

On suse we have the header in a subdir inside /usr/include, so
pkgconfig has to be used to find out proper CFLAGS.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

This happens for instance if you run a test under sudo which
then runs lxc commands under 'su - <someuser>'
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

* nokill option of lxc-stop (commit 84fbfcb4)
* lxc.haltsignal in lxc.conf (commit f0f1d8c0)
* fix sgml (commit d438f5a0)
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Setting "lxc.console = none" causes following failure during startup

      lxc-start 1389039861.061 INFO     lxc_start_ui - using rcfile lxcpath/original/config
      lxc-start 1389039861.062 INFO     lxc_confile - read uid map: type u nsid 0 hostid 260000 range 10000
      lxc-start 1389039861.062 INFO     lxc_confile - read uid map: type g nsid 0 hostid 260000 range 10000
      lxc-start 1389039861.062 WARN     lxc_log - lxc_log_init called with log already initialized
      lxc-start 1389039861.065 INFO     lxc_lsm - LSM security driver AppArmor
      lxc-start 1389039861.066 DEBUG    lxc_conf - allocated pty '/dev/pts/0' (5/6)
      lxc-start 1389039861.066 DEBUG    lxc_conf - allocated pty '/dev/pts/7' (7/8)
      lxc-start 1389039861.066 DEBUG    lxc_conf - allocated pty '/dev/pts/8' (9/10)
      lxc-start 1389039861.066 DEBUG    lxc_conf - allocated pty '/dev/pts/9' (11/12)
      lxc-start 1389039861.066 INFO     lxc_conf - tty's configured
      lxc-start 1389039861.066 DEBUG    lxc_start - sigchild handler set
      lxc-start 1389039861.066 ERROR    lxc_conf - Error chowning
      lxc-start 1389039861.066 ERROR    lxc_conf - Failed to chown
      lxc-start 1389039861.066 ERROR    lxc_start - Failed to shift tty into container
      lxc-start 1389039861.066 ERROR    lxc_start - failed to initialize the container
      lxc-start 1389039861.067 INFO     lxc_monitor - using monitor sock name lxc/0863ffed81827105/lxcpath

fix it by checking the console.name before using it.
Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

doxygen and graphviz causes travis vm to download ~400 MB from internet
and causes travis builds to timeouts occasionally.
Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Debian and Ubuntu uses docbook2x-man, but some other distr like suse
uses docbook-to-man. I think all of them should work on LXC.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

- use this in the busybox template since busybox's init expects
  to receive SIGUSR1 to halt

- fix lxc.stopsignal to be output by write_config so lxcapi_clone()
  and lxcapi_save_config() will output it
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

On my Ubuntu 13.10 system, lxc-ps was always giving empty output. The
output of /proc/$initpid/cgroup was

11:name=systemd:/user/1000.user/c3.session
10:hugetlb:/container
9:perf_event:/container
8:blkio:/container
7:freezer:/container
6:devices:/container
5:memory:/container
4:cpuacct:/container
3:cpu:/container
2:cpuset:/container

Using the cpuset line should be a safer option.
Signed-off-by: Nick Huber <nicholashuber@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This makes the arguments between lxc-stop and lxc-autostart more
consistent, so that --shutdown doesn't have two different meanings.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

* lxc-attach(1): Update to the status of kernel 3.8 or higher
* lxc-create(1), lxc-destroy(1): Now lxc-ls don't have "-l" option, so remove
* lxc(7): update description of lxc-ls and lxc-info to current version
* see-also: fix lxc(1) to lxc(7)
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit a771fe18Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Add pthread_atfork check to configure.ac and uses it when necessary,
Introduces tls.m4 macro for checking thread-local storage support, Puts
values array into thread-local storage
(lxc_global_config_value@src/lxc/utils.c), Removes
static_lock/static_unlock from LXC code.

Lastly, it introduces a warning for bionic users about multithreaded
usage of LXC.

(requires 64b1be29 to be reverted first)
Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This reverts commit 64b1be29.

Reverting in preparation for another implementation which is
bionic-compatible.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

This change updates the way init scripts get installed so that more
than one init system can be supported. Instead of installing the
systemd service file from the spec file, it should be installed at
make install time, so that someone compiling from source also gets
the unit file installed.

Update the plamo template to use a lock file not named just
/var/lock/subsys/lxc since the presence of that file is used by
sysv init rc file to know if it should run the K01lxc script. This
also makes it consistent with the other templates which use
/var/lock/subsys/lxc-$template-name.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>