Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

big big login delays in CentOS 7 systemd

In contrast to what the comment above the line disabling it said,
it seems to work just fine.  It also is needed on current kernels
(until Eric's patch hits upstream) to prevent unprivileged containers
from hosing fuse filesystems they inherit.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

If a container has a bind mount from a host nfs or fuse
filesystem, and does 'umount -f', it will disconnect the
host's filesystem.  This patch adds a seccomp rule to
block umount -f from a container.  It also adds that rule
to the default seccomp profile.

Thanks stgraber for the idea :)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

lxc-opensuse: Disable building openSUSE containers on 13.2/Tumbleweed only if wrong version of build package is installed
Signed-off-by: Johannes Kastl <git@ojkastl.de>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Johannes Kastl <git@ojkastl.de>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Veres Lajos <vlajos@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

There are now two (permitted) ways to add data to netlink message:

 1. put_xxx()
 2. call nlmsg_reserve() to get a pointer to newly reserved room within the
    original netlink message, then write or memcpy data to that area.

Both of them guarantee adding requested length data do not overflow the
pre-allocated message buffer by checking against its cap field first.

And there may be no need to access nlmsg_len outside nl module, because both
put_xxx() and nlmsg_reserve() have alread did that for us.
Signed-off-by: Shuai Zhang <zs.broccoli@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

when waitpid() is interrupted, errno is not set to the negative
value -EINTR. It is set to EINTR. check against EINTR.
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Shuai Zhang <zs.broccoli@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

The previous error message made it look like the host interface name was
the concatenation of both the host and guest interface names.

Closes #374
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

This commit fixes two issues at the time of clone:
* unnecessary directory is created when clone between overlayfs/aufs
* clone failed when the end of rootfs path is not "/rootfs"
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This patch creates workdir as "olwork", and retry mount with workdir
option when mount is failed.
It is used to prepare files before atomically swithing with
destination, and needs to be on the same filesystem as upperdir. It's
OK for it to be empty.
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Currently when we clone a container, bdev_copy passes NULL as dst argument
of bdev_init, then sees bdev->dest (as a result) is NULL, and sets
bdev->dest to $lxcpath/$name/rootfs.  so $ops->clone_paths() can
assume that "/rootfs" is at the end of the path.  The overlayfs and
aufs clonepaths do assume that and index to endofstring-6 and append
delta0.  Let's be more robust by actually finding the last / in
the path.

Then, instead of always setting oldbdev->dest to $lxcpath/$name/rootfs,
set it to oldbdev->src.  Else dir_clonepaths fails when mounting src
onto dest bc dest does not exist.  We could also fix that by creating
bdev->dest if needed, but that addes an empty directory to the old
container.

This fixes 'lxc-clone -o x1 -n x2' if x1 has lxc.rootfs = /var/lib/lxc/x1/x
and makes the overlayfs and aufs paths less fragile should something else
change.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Ran into this when trying to automate stgraber's "GUI in containers"
post.
Signed-off-by: Casey Marshall <casey.marshall@canonical.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Johannes Kastl <git@ojkastl.de>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Cameron Norman <camerontnorman@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Do as much as possible to allow containers switching from non-systemd to
systemd to work as intended (but nothing that will cause side effects).
Use update-rc.d disable instead of remove so the init scripts are not
re-enabled when the package is updated
Signed-off-by: Cameron Norman <camerontnorman@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Containers with systemd need a somewhat special setup, which I borrowed
and adapted from lxc-fedora. These changes are required so that Debian 8
(jessie) containers work properly, and are a no-op for previous Debian
versions.
Signed-off-by: Antonio Terceiro <terceiro@debian.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Fix a typo in the lines inserted in the default sources.list.
Change the default mirror to http.debian.net which is (supposedly) more
accurate and better than cdn.debian.net for a generic configuration.
Use security.debian.org directly for the {release}/updates repository.
Signed-off-by: Gu1 <gu1@aeroxteam.fr>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

- added --mirror, --security-mirror and --package parameters
- generate source.list
- install packages into final lxc instance

Update by Stéphane Graber for stable-1.0:
 - Drop the addition of --packages (new feature)
Signed-off-by: Alexander Dreweke <alexander@dreweke.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Bind mounts do not honor filesystem mount options. This change will
remount filesystems that are bind mounted if there are changes to
filesystem mount options, specifically if the mount is readonly.
Signed-off-by: Abin Shahab <ashahab@altiscale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Create a tty so we get login prompt on console by default
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

nlmsg_len is the length of message including header.
Signed-off-by: Shuai Zhang <zs.broccoli@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Disabled building openSUSE containers on openSUSE 13.2 and openSUSE
Tumbleweed due to faulty behaviour with newer versions of
init_buildsystem.
Signed-off-by: Johannes Kastl <git@ojkastl.de>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 0dcbd624Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Closes: #355
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: 謝致邦 <Yeking@Red54.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: 謝致邦 <Yeking@Red54.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Support creation and use of lxc-cirros by unprivileged users.

If we detect we are an unprivileged user, then insist that we
be in a userns with a id mapping.

If we are in a userns, then don't extract /dev when extracting
the rootfs.

If we are not root, then save the tarball to ~/.cache/lxc/cirros
instead of /var/cache/lxc/cirros.

If we are not roo, then include entries to auto-mount proc and sys,
as well as bind-mount devices.

Cc: Scott Moser <smoser@ubuntu.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This is a multipart message in MIME format.

Fixes a small (but consistent) spelling mistake in conf.c
Signed-off-by: Joel Nider <joeln@il.ibm.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Otherwise both resulting takss will print what they had flushed when they
exit.

This fixes https://bugs.launchpad.net/bugs/1389244Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Tycho Andersen <tycho.andersen@canonical.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Do mkdir $rootfs/dev/shm and then mount tmpfs on /dev/shm.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

We allocate a pointer and save this address in a static variable. After
this we freed this pointer and return.

Here a cuttout of a valgrind report:

	[...]
	==11568== Invalid read of size 1
	==11568==    at 0x4C2D524: strlen (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
	==11568==    by 0x5961C9B: puts (in /usr/lib/libc-2.20.so)
	==11568==    by 0x400890: main (lxc_config.c:73)
	==11568==  Address 0x6933e21 is 1 bytes inside a block of size 32 free'd
	==11568==    at 0x4C2B200: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
	==11568==    by 0x4E654F2: lxc_global_config_value (utils.c:415)
	==11568==    by 0x4E92177: lxc_get_global_config_item (lxccontainer.c:2287)
	==11568==    by 0x400883: main (lxc_config.c:71)
	[...]
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>