Update lxc-autostart(1) and lxc.container.conf(5) for commit 015f0dd7.
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This hides some of the confusing "command X failed to receive response"
why are usually caused by another more understandable error.

On failure to start() from lxc-start, a new error message is displayed,
suggesting the user sets logfile and loglevel and if using -d, restarts
the container in the foreground instead.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This is to deal with the GPG pool occasionaly yielding broken servers.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Set the halt.target action to be sigpwr.target.  This allows
SIGPWR to properly shut the container down from lxc-stop.

Renable the systemd-journald.service.
Signed-off-by: Michael H. Warfield <mhw@WittsEnd.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

before using it, like the other snapshot api methods do.

This will need to go into stable-1.0 as well.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

The template name isn't required, if it's not passed, then create will
simply be asked to create a container without a rootfs.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Bartosz Tomczyk <bartekplus@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Bartosz Tomczyk <bartekplus@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Fix configure_plamo so as not to configure wireless network interface
in containers even if the host uses wireless network interface.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This adds new functionality to lxc-autostart.

*) The -g / --groups option is multiple cummulative entry.
	This may be mixed freely with the previous comma separated
	group list convention.  Groups are processed in the
	order they first appear in the aggregated group list.

*) The NULL group may be specified in the group list using either a
	leading comma, a trailing comma, or an embedded comma.

*) Booting proceeds in order of the groups specified on the command line
	then ordered by lxc.start.order and name collalating sequence.

*) Default host bootup is now specified as "-g onboot," meaning that first
	the "onboot" group is booted and then any remaining enabled
	containers in the NULL group are booted.

*) Adds documentation to lxc-autostart for -g processing order and
	combinations.

*) Parameterizes bootgroups, options, and shutdown delay in init scripts
	and services.

*) Update the various init scripts to use lxc-autostart in a similar way.
Reported-by: CDR <venefax@gmail.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Michael H. Warfield <mhw@WittsEnd.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

AC_SEARCH_LIBS always places the library being queried into LIBS.  We
don't want that - we were only checking whether a function is
available.  Not everything (notably not init.lxc.static) needs to
link against -lcgmanager.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Move choose_init into utils.c so we can re-use it.  Make it and on_path
accept an optional rootfs argument to prepend to the paths when checking
whether the file exists.

Also add lxc.init.static to .gitignore
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Changelog:

May 19: put init.lxc.static into container's root dir
	rather than under SBINDIR [stgraber].
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

To avoid having to copy all the library dependencies into the container.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Bartosz Tomczyk <bartekplus@gmail.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

If you attach a file to /dev/nbd0, it may take some time for /dev/nbd0p1
to show up.  Allow up to 5 seconds in that case, then bail.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

It is not possible to mount a block device from a non-init user namespace.
Therefore if root on the host is starting a container with a uid
mapping, and the rootfs is a block device, then mount the rootfs before
we spawn the container init task.

This addresses https://github.com/lxc/lxc/issues/221Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Newer kernels optionally disallow reading /proc/$$/personality by
non-root users.  We can get the personality through the lxc command
interface, so do so.

Also try to be more consistent about personality being a signed long.
We had it as int, unsigned long, signed long throughout the code.

(This addresses bug
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1322067 :
3.15.0-1.x breaks lxc-attach for unprivileged containers)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Otherwise the name=systemd cgroup isn't changed to one which
the lxc-unpriv user can write to, causing the test to fail.

This allows lxc-test-unpriv and lxc-test-usernic to pass when run in an
unprivileged container with cgmanager.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

we actually meant to check *p not p.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

When I converted attach and enter to using move_pid_abs, these needed
to use the new get_pid_cgroup_abs method to get an absolute path.  But
for some inexplicable reason I also converted the functions which get
and set cgroup properties to use the absolute paths.  These are simply
not compatible with the cgmanager set_value and get_value methods.
This breaks for instance lxc-test-cgpath.

So undo that.  With this patch lxc-test-cgpath, lxc-test-autotest,
and lxc-test-concurrent once again pass in a nested container.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: ChangZhuo Chen (陳昌倬) <czchen@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit f1c26f2cSigned-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 6191f4f4Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

For years it has been best practice to use a relative path as
the mount target.  But the manpage hasn't reflect that.  Fix it.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

backing stores supported by qemu-nbd can be attached to a nbd block
device using qemu-nbd.  This user-space process (pair) stays around for
the duration of the device attachment.  Obviously we want it to go away
when the container shuts down, but not before the filesystems have been
cleanly unmounted.

The device attachment is done from the task which will become the
container monitor before the container setup+init task is spawned.
That task starts in a new pid namespace to ensure that the qemu-nbd
process will be killed if need be.  It sets its parent death signal
to sighup, and, on receiving sighup, attempts to do a clean
qemu-device detach, then exits.  This should ensure that the
device is detached if the qemu monitor crashes or exits.

It may be worth adding a delay before the qemu-nbd is detached, but
my brief tests haven't seen any data corruption.

Only the parts required for running a nbd-backed container are
implemented here.  Create, destroy, and clone are not.  The first
use of this that I imagine is for people to use downloaded nbd-backed
images (like ubuntu cloud images, or anything previously used with
qemu).  I imagine people will want to create/clone/destroy out of
band using qemu-img, but if I'm wrong about that we can implement
the rest later.

Because attach_block_device() is done before the bdev is initialized,
and bdev_init needs to know the nbd index so that it can mount the
filesystem, we now need to pass the lxc_conf.

file_exists() is moved to utils.c so we can use it from bdev.c

The nbd attach/detach should lay the groundwork for trivial implementation
of qed and raw images.

changelog (may 12): fix idx check at detach
changelog (may 15): generalize qcow2 to nbd
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

This is a fix to commit 5f2ea8cf.
Sorry, not sure how I missed this in testing the original patch.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

when using btrfs backend lxc-create first creates rootfs in /usr/lib/lxc/rootfs
directory before moving it to /var/lib/lxc or other directory supplied by the
command line. Archlinux template relied in $rootfs_path which made containers
created with btrfs backend have lxc.rootfs set to /usr/lib/lxc/rootfs. By using
$path instead of $rootfs_path we make sure that lxc.rootfs is always correct.
Signed-off-by: Edvinas Klovas <edvinas@pnd.io>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>