The purpose of this patch is to limit the search
of pids to those in containers by looking at first
in the /cgroup/<name>/tasks  when --lxc or --names options
are specified by user.
The idea is to speedup the output when only few
container names are specified while the machine
is running with many processes.
Signed-off-by: Michel Normand <michel.mno@free.fr>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

With previous changes that allow to start a container
without the need to create it; the lxc-ls was only reporting
the created containers.
With this patch, the lxc-ls is now reporting created and active
containers.
Signed-off-by: Michel Normand <michel.mno@free.fr>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Fix bad name parameter in the lxc-ps man page.
Signed-off-by: Michel Normand <michel.mno@free.fr>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

this state is reported when the lxc-freeze command
was issued on the container.
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

if, for some reason, openpty() fails, lxc_create_tty() will
leak all previous ptys and leave the config structure in a
inconsistent state (wrt the number of ptys actually opened)
Fix that by explicitly closing all previously opened ptys
in case of failure and by setting number of actually opened
ttys after actual open
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

The configuration examples have been moved to doc/lxc/examples.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Ensure that lxc.netdev.link is specified for macvlan interfaces,
since it's required.

While at it, simplify logic in instanciate_macvlan():
remove unnecessary-complicating goto statements (we only
need to perform a cleanup in one place)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Before, a veth device pair required a link which was treated as
a bridge device.  Code crashed if there was no lxc.network.link
specified.  Fix that by allowing lxc.network.link to be unset
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

The container will be a directory where the user can store everything,
so we create one directory and store a configuration file inside.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

With the previous modifications, a temporary directory is created
to mount the rootfs in order to have the system container to remount
itself the '/' directory.

But in case of daemonize, we change the directory, so when the rootfs
is specified with a relative path, we can not access it.

Don't chdir, as that will be done automatically later in the chroot
setup.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Update the man pages regarding the different modifications.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Change Checkpoint / Restart API
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Remove checkpoint / restart dead code.
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Display the 'rcfile' value on error
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

A mindless change to encapsulate a little more the function.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

in confile.c we currently have a ton of functions each doing
the same thing.  Clean them up by providing common routines
to do the main work.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

struct lxc_netdev is used to hold information from cnfig file
about a network device/configuration.  Make the fields of this
structure to be named similarily with the config file keywords,
namely:
 s/ifname/link/ - host-side link for the device (bridge or eth0)
 s/newname/name/ - container-side ifname
It is insane to have completely different names in config file
and in structure/variable names :)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Update the man pages regarding the modifications around the 
configuration option, volatile containers and new configuration
file format.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

This function will be needed for the restart function.
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

add capabilities for lxc-checkpoint
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

This is not required immidiately but may be used by other init.
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

The command specifies a configuration file => use it
The command does not specify a configuration but the container
was created before, use the configuration.
The command does not specify a configuration and the container
was not created before, use default.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Typo ;)
Signed-off-by: Andrian Nord <NightNord@gmail.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Instead of doing I/O one-byte-at-a-time in lxc_console,
which is slow, let's do it in batches.  Only for output
(from container to the host system), since input is most
likely one-byte-at-a-time anyway (from a keyboard).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

I noticed that container's consoles aren't quite useable
(be it lxc-console or lxc-start with getty bound to /dev/console).
The main problem is a complete lack of window resizing support:
when I resize an xterm window with lxc-start or lxc-console, the
"guest" does not know about that and continues to think that the
terminal is 80x25 still.

Is it just a lack of functionality (missing implementation) or
something problematic?
 
Ok, the attached patch fixes this.
 
It moves the 'master' variable out of main function so it's
accessible from the signal handler, sets up SIGWINCH handler
to call a (newly created) winsz() function that gets the
current tty size using TIOCGWINSZ ioctl and if that works,
sets up the pty size using TIOCSWINSZ.  That same function
is called at the start as well, when setting up the signal
handler.
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-By: Daniel Lezcano <dlezcano@fr.ibm.com>

Maybe it will be more logical to keep configs into /etc/lxc/?

Or, maybe, just use --with-config-path=/some/path switch into configure,
which could be overridden as user wants to? Something like this one (in
assumption, that this is up to user to create corresponding directory):
Signed-off-by: Andrian Nord <NightNord@gmail.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

<lxc/lxc.h>  should only include what is needed. This patch removes
all useless headers from lxc.h and fixed other .c files.
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

without this correction, unable to create a container with a configuration file.
This is a side effect of commit 48862401Signed-off-by: Michel Normand <michel.mno@free.fr>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Recent changes around the configuration tree broke the current
implementation of the lxc-netstat.

Instead of retrieving the init_pid in the /var/lxc/<name>/...,
pick one in the cgroup tasks list.

There is still a restriction with this command making impossible
to run it as non-root, any idea is welcome :(
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Patch moves etc/* contents into doc/examples/ and adds
--disable-examples configure switch which may be used not to install
examples. Default is to install them into ${docdir}/examples (commonly:
/usr/share/doc/lxc/examples)
Signed-off-by: Andrian Nord <NightNord@gmail.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

This script do not use extract fstab (as done by lxc-debian)
so there is no reason to set the lxc.mount key in config file.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Michel Normand <michel_mno@laposte.net>

Fix script to not add a fstab file.
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

The purpose of this new keyword is to save in main config file
all the lines of a provided fstab file.
This will ultimately replace the the lxc.mount keyword
when lxc scripts will use the new keyword.

Warning: I did not validated this patch
in all conditions of provided malformed input string.
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

in today's code lxc-start to not stop if setup_cgroup is detecting an error
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

lxc should not save in config generated file the name of an
empty file if no additionnal mount point specified by user.
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

The simplification of the container configuration makes
pointless to have so much complexity in the container creation.
Let's remove that and replace by some scripts.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

When a container was created, its configuration is used.
When a container was not created, the configuration specified in
the command line is used, if not configuration file is used,
default values are used.

That allows to create 'volatile' container, like tmp files.
It is useful for example to spawn different container with the
same generic configuration file. That let the user to have its own
repository of configuration files.

And, more important, that fix temporary created container with
lxc-execute to be not deleted when the host crash or the command
is killed.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>

Fix compile failure

commit 884866b3 introduces a compile
failure,

make[3]: *** No rule to make target `lock.c', needed by `liblxc_so-lock.o'.  Stop.
make[3]: Leaving directory `/home/dhaval/work/lxc/lxc/src/lxc'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/dhaval/work/lxc/lxc/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/dhaval/work/lxc/lxc/src'
make: *** [all-recursive] Error 1

Remove those entries from the Makefile
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>