This is a GNU extension and some libcs might be missing it.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

Signed-off-by: Evgeni Golov <evgeni@debian.org>

Signed-off-by: Evgeni Golov <evgeni@debian.org>

there is no reason to not do this :)
Signed-off-by: Evgeni Golov <evgeni@debian.org>

Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

Add squashfs format file support for lxc-ubuntu-cloud.in
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>

Add zesty to KNOWN_RELEASES
Remove EOL wily from KNOWN_RELEASES
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>

In case the system was booted with

    isolcpus=n_i-n_j,n_k,n_m

we cannot simply copy the cpuset.cpus file from our parent cgroup. For example,
in the root cgroup cpuset.cpus will contain all of the cpus including the
isolated cpus. Copying the values of the root cgroup into a child cgroup will
lead to a wrong view in /proc/self/status: For the root cgroup
/sys/fs/cgroup/cpuset /proc/self/status will correctly show

    Cpus_allowed_list:      0-1,3

even though cpuset.cpus will show

    0-3

However, initializing a subcgroup in the cpuset controller by copying the
cpuset.cpus setting from the root cgroup will cause /proc/self/status to
incorrectly show

    Cpus_allowed_list:      0-3

Hence, we need to make sure to remove the isolated cpus from cpuset.cpus. Seth
has argued that this is not a kernel bug but by design. So let us be the smart
guys and fix this in liblxc.

The solution is straightforward: To avoid having to work with raw cpulist
strings we create cpumasks based on uint32_t bit arrays.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

lxc_append_string() appends strings without separator. This is mostly useful
for reading in whole files line-by-line.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

this patch create /var/run link to point to /run.

This will fix various issue present when /var/run is persistent.
Signed-off-by: Marc Gariepy <gariepy.marc@gmail.com>

If we do it earlier we end up with a wrong view of /proc/self/cgroup. For
example, assume we unshare(CLONE_NEWCGROUP) first, and then create the cgroup
for the container, say /sys/fs/cgroup/cpuset/lxc/c, then /proc/self/cgroup
would show us:

     8:cpuset:/lxc/c

whereas it should actually show

     8:cpuset:/
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

This would already fail, but with a not-as-good error message. Let's make
the error better.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

When we read sizeof(buf) bytes here, we'd write off the end of the array,
which is bad :)
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

The macros put a \n in for us, so let's not put another one in.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

This also allows us to commonize some bits of the dup2 code.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

On shutdown we move physical network interfaces back to the
host namespace and rename them afterwards as well as in the
later lxc_network_delete() step. However, if the device had
a name which already exists in the host namespace then the
moving fails and so do the subsequent rename attempts. When
the namespace ceases to exist the devices finally end up
in the host namespace named 'dev<ID>' by the kernel.

In order to avoid this, we do the moving and renaming in a
single step (lxc_netdev_move_by_*()'s move & rename happen
in a single netlink transaction).
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>

We need to log longer lines due to CRIU arguments.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

We switched to --ext-mount-map auto because of "system" (liblxc) added
mounts like the cgmanager socket that weren't in the config file. This had
the added advantage that we could drop all the mount processing code,
because we no longer needed an --ext-mount-map argument.

The problem here is that mounts can move between hosts. While
--ext-mount-map auto does its best to detect this situation, it explicitly
disallows moves that change the path name. In LXD, we bind mount
/var/lib/lxd/shmounts/$container to /dev/.lxd-mounts for each container,
and so when a container is renamed in a migration, the name changes.
--ext-mount-map auto won't detect this, and so the migration fails.

We *could* implement mount rewriting in CRIU, but my experience with cgroup
and apparmor rewriting is that this is painful and error prone. Instead, it
is much easier to go back to explicitly listing --ext-mount-map arguments
from the config file, and allow the source of the bind to change. We leave
--ext-mount-map auto to catch any stragling (or future) system added
mounts.

I believe this should fix Launchpad Bug 1580765
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

When the container is already running our manpage promises to exit with 2.
Let's make it so.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

Somehow this implementation of a cgroupfs backend decided to use the hierarchy
numbers it detects in /proc/cgroups and /proc/self/cgroups as indices for
the hierarchy struct. Controller numbering usually starts at 1 but may start at
0 if:

    a) the controller is not mounted on a cgroups v1 hierarchy;
    b) the controller is bound to the cgroups v2 single unified hierarchy; or
    c) the controller is disabled

To avoid having to rework our fallback backend significantly, we should
explicitly check for each controller if hierarchy[i] != NULL.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

If cgroupv2 is enabled either alone or together with legacy hierarchies
/proc/self/cgroup can contain entries of the form:

        0::/

These entries need to be skipped.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

it's "list of columns", not "list of column"
Signed-off-by: Evgeni Golov <evgeni@debian.org>

Signed-off-by: Evgeni Golov <evgeni@debian.org>

this is how it is shipped in Debian and Ubuntu
Signed-off-by: Evgeni Golov <evgeni@debian.org>

And let's be on the safe side by NULLing free()ed variables.
Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

Signed-off-by: Evgeni Golov <evgeni@debian.org>

Closes: #502
Signed-off-by: Evgeni Golov <evgeni@debian.org>

rather than waiting and later unsharing.

This "makes the creation of a new cgroup early enough that the existing
cgroup mounts are visible.  Which means any fancy permission checks
I dream will work on a future version of liblxc."

This also includes what should be a tiny improvement regarding netns,
though it's conceivable it'll break something.  Remember that with new
kernels we need to unshare netns after we've become the root user in the
new userns, so that netns files are owned by that root.  But we were
passing the unfiltered handler->clone_flags to the original clone().
This just resulted in a temporary extra netns generation, but still
worked since our target netns, which we passed our devices into, was
created late enough.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Signed-off-by: Christian Brauner <christian.brauner@canonical.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

This will never actually overflow, because %d is 32 bits and eth is 128
bytes long, but safety first :)
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

We need this for calculating the name of unnamed interfaces in the config.
But we also need to remember to increment it :)
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

--veth-pair has been deprecated as of 2.6, let's use the new --external
instead.
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>

This should allow proper filtering of build flags for libraries and make
it easier to use PIE/PIC.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Correct the backingstorage typo in lxc_copy.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>

There are no personalities for s390x, so don't list itself as one.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>