Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Removing templates/lxc-ubuntu from configure.ac makes it so that it is
not included in the tarball that make dist builds (and therefore also
breaks the rpm build).
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

mounted-dev.conf won't be running that in container's userspace as it
previously would have, so make sure that all the devices it would have
created (other than ones which lxc later finagles) get created.
To achieve this, we have to first mount /dev, then run MAKEDEV, then
run setup_autodev to populate the rest of /dev.

Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1075717

Changelog:
  v2: Use INFO rather than ERROR when makedev fails, since we won't stop the container boot.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

When using --enable-tests on Fedora, the linker complains with:
"undefined reference to symbol sem_getvalue", which nm shows to be in
libpthread not librt. Build tested on Fedora, Oracle Linux, and Ubuntu.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

$LANGPACK_LIST was renamed to $langpacks but not all the code was updated.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Replace all remaining tabs by 8 spaces, to properly indent by 4 spaces.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

lxc-ubuntu no longer uses any build time variables, therefore it can
now be simply copied to the target without any autoconf magic.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

In addition to creating the current locale in the container, also
try to scan the host and extra the list of langpacks installed there,
then pass that list to debootstrap as additional packages to install.

On distros that don't have dpkg, only language-pack-en will be installed.
The code will always ensure that language-pack-en is ALWAYS installed in the
target, similar to what Ubuntu does with its various media.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Move some old code from the trim() function into the main configure_ubuntu
function so that we always create a locale in the container.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Both 69d66f1e and f02ce27d added the aa_profile = unconfined hunk, but only
the first was needed, maybe a merge error? The second one causes the
template to get an error on the EOF line. This essentially reverts
f02ce27d.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

commit 8f2c3a70 reverted a fix
for bad handling by lxc-clone of 'lxc.mount[ \t]' lines.
Fix.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

This allows containers created with lxc-create to also boot under
libvirt/Virtual Machine Monitor
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This makes it easier to write a binding, and presents a cleaner API. Use
strdupa in a few places to get mutable strings for tokenizing / parsing.
Also change the argv type in lxcapi_start and lxcapi_create to match
that of execv(3).
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Avoid getop --longoptions.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Avoid getopt --longoptions
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

LXCDIR is only used in lxc_container_new, whereas LXCPATH is used throughout
the rest of lxc, and even in the same file as lxc_container_new (for example
create_container_dir()).
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

- replace 'echo -e' with printf
- replace 'if [[ ... ]]' with 'if [ ... ]'
- add \ at after && and || when those are at end of line
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

There is no reason to depend on bash for a single echo.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

The -u shortopt matching --userdata was not specified, and when -L
is found shift should have been by 1 not 2 since there is no optarg.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Add an option to test for a give state. This is useful for scripts.
It lets us you do thing like:

 if lxc-info --name myname --state-is RUNNING; then
   ...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Most of these were found with valgrind by repeatedly doing lxc_container_new
followed by lxc_container_put. Also free memory when config items are
re-parsed, as happens when lxcapi_set_config_item() is called. Refactored
path type config items to use a common underlying routine.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Valgrind showed use of ->next field after item has been free()ed.
Introduce a lxc_list_for_each_safe() which allows traversal of a list
when the body of the loop may remove the currently iterated item.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

lxc_log_init will leak an fd when it is called by a long running
program that may call lxc_container_new multiple times. Fix by
only opening the log if it is not already open.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Use our own len() function for network interfaces as doing
len(container.get_config_item("lxc.network")) will fail when the
list is empty.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

The new version of the pep8 command is detecting more indentation
mistakes than it used to, this fixes them.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

The kernel config option for the memory cgroup was changed in 3.6
from CONFIG_CGROUP_MEM_RES_CTLR to CONFIG_MEMCG with commit c255a458.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Fix a typo in the previous lxc.conf.sgml.in change.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Add a container config option to mount and populate /dev in a container.

We might want to add options to specify a max size for /dev other than
the default 100k, and to specify other devices to create.  And maybe
someone can think of a better name than autodev.

Changelog: Don't error out if we couldn't mknod a /dev/ttyN.
Changelog: Describe the option in lxc.conf manpage.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>

Add a new lxc-device tool which uses the new add_device() function of
the python API and lets you add a new device node to a running container.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This introduces a new add_devices() call to the python API.

Parameters:
 - path => Mandatory, path to a character or block device on the host
 - destpath => Optional, alternative path inside the container

The function will allow the node in the container's devices cgroup and
then create the entry in the container.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Apparently 'local' is not POSIX. Don't use it.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

The e60a8164 introduced a bug that caused
first argument passed over to the template script get lost.

This patch fixes it.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

- use '[ -x /path/prog ]' instead of 'type /path/prog'
- avoid getopt --longoptions
- add \ at after && and || when those are at end of line
- make sure condition expands to empty string if variable is empty
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

As suggested by Serge Hallyn on lxc-devel.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Add option to create a pidfile for lxc-start. This is helpful for
init scripts and process monitors when running as daemon.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Tested on Oracle Linux 6 and Fedora 17
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Frederic Crozat <fcrozat@suse.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>