Building LXC in a separate target directory, by running configure from
outside the source tree, failed with multiple errors, mostly in the
Python and Lua extensions, due to assuming the source dir and build dir
are the same in a few places. To fix that:

- Pre-process setup.py with the appropriate directories at configure
  time
- Introduce the build dir as an include path in the Lua Makefile
- Link the default container configuration file from the alternatives
  in the configure stage, instead of setting a variable and using it
  in the Makefile
Signed-off-by: Daniel Miranda <danielkza2@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This prevents u2 from going into /home/u1/.local/share/lxc/u1/rootfs
and running setuid-root applications to get write access to u1's
container rootfs.

v2: set umask to 002 for the mkdir.  Otherwise if umask happens to be,
say, 022, then user does not have write permissions under the container
dir and creation of $containerdir/partial file will fail.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

Unprivileged users require "-o user_subvol_rm_allowed" mount option for btrfs.
Make the INFO level message to ERROR to make it clear, which now says following;

[caglar@qop:~] lxc-destroy -n rubik
lxc_container: Is the rootfs mounted with -o user_subvol_rm_allowed?
lxc_container: Error destroying rootfs for rubik
Destroying rubik failed
Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

- If "installpkg" command does not exist, lxc-plamo temporarily
  install the command with static linked tar command into the lxc
  cache directory.  The tar command does not refer to passwd/group
  files, which means that only a few files/directories are extracted
  with wrong user/group ownership.  To avoid this, the installpkg
  command now uses the standard tar command in the system.
- Change mode to 666 for $rootfs/dev/null to allow write access for
  all users.
- Small fix in usage message.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: KATOH Yasufumi <karma@jazz.email.ne.jp>

A long enough lxcpath (and small PATH_MAX through crappy defines) can cause
the creation of the string to be hashed to fail.  So just use alloca to
get the size string we need.

More importantly, while I can't explain it, if lxcpath is too long, setting
sockname[sizeof(addr->sun_path)-2] to \0 simply doesn't seem to work.  So set
sockname[sizeof(addr->sun_path)-3] to \0, which does work.

With this, and with

lxc.lxcpath = /opt/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789/lxc0123456789

in /etc/lxc/lxc.conf, I can run lxc-wait just fine.  Without it, it fails
(as does lxc-start -d, which uses lxc_wait to verify the container started)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

The container command socket is an abstract unix socket containing
the lxcpath and container name.  Those can be too long.  In that case,
use the hash of the lxcpath and lxcname.  Continue to use the path and
name if possible to avoid any back compat issues.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This commit is the same as the commit 18aa217b and 99e616a6 on master
branch, except "ALL" keyword.
Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Those aren't supported, it's just a lucky coincidence that they weren't
causing problems.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This should avoid tests failure when the machine running the tests has
either very slow disks or a lot of data waiting to be flushed.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

See http://lkml.org/lkml/2014/8/13/746 and its history.  The kernel now refuses
mounts if we don't add ro,nosuid,nodev,noexec flags if they were already there.

Also use the newly found info to skip remount if unneeded.  For background, if
you want to create a read-only bind mount, then you must first mount(2) with
MS_BIND to create the bind mount, then re-mount(2) again to get the new mount
options to apply.  So if this wasn't a bind mount, or no new mount options were
introduced, then we don't do the second mount(2).

null_endofword() and get_field() were not changed, only moved up in
the file.

(Note, while I can start containers inside a privileged container with
this patch, most of the lxc tests still fail with the kernel in question;
Andy's patch seems to still be needed - a kernel with which is available
at https://launchpad.net/~serge-hallyn/+archive/ubuntu/userns-natty
ppa:serge-hallyn/userns-natty)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This commit broke the testsuite for unprivileged containers as the
container directory is now 0750 with the owner being the container root
and the group being the user's group, meaning that the parent user can
only enter the directory, not create entries in there.

This reverts commit c86da6a3.

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

This is an hybrid between Micahel's original patch and me making the new
debugging statements look like our existing ones.
Signed-off-by: "Micahel J. Evans" <mjevans1983@gmail.com>
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Lars Wikberg <lars.wikberg@anvia.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This prevents u2 from going into /home/u1/.local/share/lxc/u1/rootfs
and running setuid-root applications to get write access to u1's
container rootfs.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

(Thanks, Dwight, this one look right?)

Make sure we reap our child at cgm_{s,g}et.

Changelog: Fix change in behavior on empty read from the do_cgm_get()
           helper that was spotted by Dwight.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Dwight Engen <dwight.engen@oracle.com>

Raspberry Pi kernel finally supports all the bits required by LXC [1]

This patch makes "./configure --with-distro=raspbian" to install lxcbr0
based config file and upstart jobs.
Also src/lxc/lxc.net now checks the existence of the lxc-dnsmasq user
(and fallbacks to dnsmasq)

RPI users still need to pass
"MIRROR=http://archive.raspbian.org/raspbian/" parameter to lxc-create
to pick the correct packages

MIRROR=http://archive.raspbian.org/raspbian/ lxc-create -t debian -n rpi

[1] https://github.com/raspberrypi/linux/issues/176

stable-1.0: Cherry-picked from master minus the lxc-net change as
lxc-net isn't available in LXC 1.0.x. Instead it is assumed that the
distribution will take care of setting up the network (lxcbr0 in this
case).
Signed-off-by: S.Çağlar Onur <caglar@10ur.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>

This would have caught a regression in Ubuntu's 3.16 kernel.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

We were allocating sizeof(tree) instead of sizeof(*tree).
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Actually, get rid of the temporary variables, and set newname
and lxcpath to usable values if they were NULL.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 96f15ca1Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

logpath has been supported through lxc-start command line, but not
through the API.  Since the lxc.console is now required to be a device,
support lxc.console.logfile to be a simple file to which console output
will be logged.

clear_config_item is not supported, as it isn't for lxc.console, bc
you can do 'lxc.console.logfile =' to clear it.

(This patch is for stable-1.0)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

They don't work right now, so until we fix that, don't allow it.

(This patch is for stable-1.0)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

When `lxc.autodev = 0` and empty tmpfs is mounted on /dev
and private pts are requested, we need to ensure '/dev/pts'
exists before attempting to mount devpts on it.
Signed-off-by: Jean-Tiare LE BIGOT <jean-tiare.le-bigot@ovh.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Vincent Giersch <vincent.giersch@ovh.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Especially when using the Python API, the child process inherits of
the file descriptiors of the script.
Signed-off-by: Vincent Giersch <vincent.giersch@ovh.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Jean-Tiare LE BIGOT <jean-tiare.le-bigot@ovh.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Rabi Shanker Guha <guha.rabishankar@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

With the current old CentOS template, dnsmasq was not able to resolve
the hostname of an lxc container after it had been created. This minor
change rectifies that.
Signed-off-by: Kalman Olah <hello@kalmanolah.net>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Send container's hostname to dhcp server when getting ip address.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: Michael Werner <xaseron@googlemail.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

/dev/shm must be turned from a directory into a symlink to /run/shm.
The templates do this only if they find -d $rootfs/run/shm.  Since /run
will be a tmpfs, checking for it in the rootfs is silly.  It also is
currently broken as ubuntu cloud images have an empty /run.

(this should fix https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1353734)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Pull the #defines and struct definitions for btrfs into a separate
.h file to not clutter bdev.c

Implement btrfs recursive delete support

A non-root user isn't allow to do the ioctls needed for searching (as you can
verify with 'btrfs subvolume list').  So for an unprivileged user, if the
rootfs has subvolumes under it, deletion will fail.  Otherwise, it will
succeed.

Changelog: Aug 1:
  . Fix wrong objid passing when determining directory paths
  . In do_remove_btrfs_children, avoid dereferencing NULL dirid
  . Fix memleak in error case.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 719fae07Signed-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

Update for commit 476d302cSigned-off-by: KATOH Yasufumi <karma@jazz.email.ne.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

We only call it (so far) after doing a fork(), so this is fine.  If we
ever need such a thing from threaded context, we'll simply need to write
our own version for android.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>

This gives me:

ubuntu@c-t1:~$ lxc-create -t download -n u1
lxc_container: No mapping for container root
lxc_container: Error chowning /home/ubuntu/.local/share/lxc/u1/rootfs to container root
lxc_container: You must either run as root, or define uid mappings
lxc_container: To pass uid mappings to lxc-create, you could create
lxc_container: ~/.config/lxc/default.conf:
lxc_container: lxc.include = /etc/lxc/default.conf
lxc_container: lxc.id_map = u 0 100000 65536
lxc_container: lxc.id_map = g 0 100000 65536
lxc_container: Error creating backing store type (none) for u1
lxc_container: Error creating container u1

when I create a container without having an id mapping defined.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>